DC Motor B F Class Armature Stator Electrostatic Fluidize Coating System WIND-JF
Application:
This electrostatic fluidize powder/resin coating system is widely used in DC motor, micro armature insulating coating,
the insulation application covering automotive, motorcycle, electric bicycle, toy and small electromotor of home appliances.
This armature/stator electrostatic fluidize system is also called powder coating machine,
it composed of pre-heating zone, cooling zone, coating zone and curing zone,
Electrostatic Fluidize Coating process:
This electrostatic powder coating is divided into three major process,
1.They are resin coating,
2. Remove excess powder by scratching device of motor armature or stator surface,
3. Curing.
This powder coating process be done on the electrostatic fluid bed,then the scratching deive clean powder, after scraping, the armature/rotor or stators pass high-frequency induction heater to curing, in this way, the powder can be applied to an object, bonding to the substrate and coalescing into a smooth, continuous, essentially uniform, thick coating. Use resin 3M or AkzoNobel include moisture-proofing and insulating armatures, rotors, stators,bus bars and other motor parts. This electrostatic powder coating machine contains a powder recovery recyling device, The device comprise a dust suction pipe disposed corresponding to the coating device, the powder cleaning device and the device located in the electrostatic powder coating machine frame. The separate dust suction pipes are concentrated to the total dusting collecting pipe.The total dusting piple send powder to cyclone separator, Upper of the cyclone separator is an outlet pipe, and lower end is a powder collecting piple which connected to powder feeder. With the three stage recycling device, this machine can hold the powder or resin and friend to environment.
Parameter:
Armature/Stator OD: 15mm ~ 50mm
Core length: 8mm~60mm
Shaft length: 2mm ~ 8mm
Output: by customer request
Coating thickness: 0.15-0.5mm adjustable
Armature/Stator transfer speed: 0.1-15.meters per minute
Coating product size range:
| Micro rotor insulating coating |
automotive, motorcycle, electric bicycle, toy and small electromotor |
| Vehicle components |
ABS, HVAC,window lift, seat adjuster,sunroof and antenna, windshield wiper and fuel pump armatures |
| Moving Vehicle |
motorcycle, electric bicycle |
| Home appliances |
power tool, electric toothbrush |
| Stator/Armature size OD |
8mm to 60mm |
| Stator/Armature output per shift |
2500pcs per 8 hours for armature/stator OD size 30mm~40mm |
| Resin insulation class |
B, F, H 120℃, 155℃,180℃, For China local >155℃ is widely used
|
Please click below photo to view machine working video
|
|
DC Motor B F Class Armature Stator Electrostatic Fluidize Coating System Images
|
